上海杰出机电有限公司_金刚石钻孔机_磁座钻_墙壁切割机_工业级钻孔切割机械_磁座空心钻_杰出机电

Contact Us

Address:3rd Floor, 66# Building,No.118 Suide Road,Putuo Disctrict,Shanghai
Zip:200331
Sales Dept:+86 21 66307088
        +86 18916448497
Fax:+86 21 33093328
Contact Person:Mr.Benson
Mail:jiechutools@shjcjd.com.cn
Online Shop:shjcjd.en.alibaba.com

News

Daily Maintenance and Maintenance of Magnetic Drill

Date:2019-08-28  Source:www.shjcjd.com.cn

It can be seen from the development of the magnetic drill that the magnetic drill requires precision, and we ordinary operators need to understand its basic principles, but the maintenance of the magnetic drill is best disassembled and assembled by professionals. On the one hand, the high voltage and high magnetic drill are generated after the internal power of the magnetic drill is electrified, and on the other hand, the non-professionals are afraid of life danger. Drilling high-precision boreholes and disassembling and assembling by non-professionals may affect their accuracy.

Note: Before inspection and maintenance, it is necessary to turn off the switch and unplug the power plug.

1. The magnetic drill should be stored in a dry, clean environment without corrosive gases and out of reach of children.

2. When disassembling and inspecting the magnetic drill, each part should be well preserved. When assembling, all the parts should be arranged according to their original position, so that they can not be omitted or misassembled.

3. Drive parts of magnetic drill should be injected with lubricating oil regularly and kept clean.

4. The magnetic drill should be inspected regularly for maintenance. It is necessary to check whether the power supply lines, plugs and switches are in good condition, whether the consumables (carbon brushes, lubricating grease) are sufficient, whether the insulation resistance is normal, and whether the transmission parts are damaged.

5. Whether the resistance of the magnetic seat is normal or not, whether there is leakage, etc.

Maintenance of magnetic drilling rig and magnetic seat drilling rig: First of all, in order to ensure your life safety, before inspection and maintenance, it is necessary to close the magnetic drilling switch and unplug the power plug, so as to ensure safety.

1. Maintenance of magnetic drill/magnetic seat drill should be checked regularly. Power cord, internal wiring, plug and shunt should be checked, insulation resistance should be normal, transmission parts should be damaged.

2. Gear drive is the key point of daily maintenance of magnetic drill/magnetic seat drill. Gear drive is contact type. It needs oil injection and lubrication regularly and keeps clean. Only in this way can we ensure that the gears of our magnetic drill are not easy to wear and tear in the process of trial use. (Note: It is recommended to add lubricating oil once a month if the operation is heavy.)

3. When disassembling and inspecting the key points of daily maintenance of the magnetic drill/magnetic seat drill, every part, including insulating liner and casing, should be well preserved. In case of damage, new identical parts must be replaced. All parts should be installed in the original position during assembly, and can not be omitted.

4. Maintenance points of magnetic drill/magnetic seat drill are stored in dry, clean and non-corrosive gases and environment and in places not accessible to children.

5. If the main points of daily maintenance of the magnetic drill/seat drill are too long and the motor is hot, it is necessary to stop and rest to avoid the motor burning out due to overheating.

6. If the main points of the daily maintenance of the magnetic drill/seat drill are not used for a long time, remember to remove the drill bit and keep the drill bit and the drill tool handle clean, and do a good job of anti-rust measures.